Cobra USB Programmer for FPV and Wing ESCs
The Cobra USB Programmer allows users to connect their Cobra Mini FPV or Wing speed controller to a PC computer so that they can make setting changes, firmware changes, or perform firmware updates.
The Cobra USB Programmer allows users to connect their Cobra Mini FPV or Wing speed controller to a PC computer so that they can make setting changes, firmware changes, or perform firmware updates. This programmer works with both the 20 amp and 30amp Mini FPV ESC's and the Cobra Wing 30A, 40A, 60A, and 80A ESC's.
The programmer plugs directly into a USB port on any Windows PC, and is self-powered from the USB port. When used with Windows 7, 8, 8.1 and 10, the drivers for this programmer are already included in the driver database, and will automatically load when the programmer is plugged in for the first time. For older PC's running Windows 2000, XP or Vista, a driver must be installed before plugging the programmer in for the first time. A link to this unified driver can be found below.
A Graphical User Interface (GUI) program is also required to allow the user to make changes to the existing firmware, or to load new versions of firmware. A link to this program file is also included below.
Windows Driver Files
Windows User Interface Program
Programming Instructions for Cobra Wing Series ESC's
| Cobra USB Programmer Specifications | |
|---|---|
| Weight (With Connectors) | 7.2 grams (0.25 oz) |
| Power Requirements | None (USB) |
| Output Cable Length | 6 Inches, 150mm |
| Programmer Size, in mm | 48 x 17 x 6 |
| Programmer Size, in inches | 1.89 x 0.67 x 0.24 |
| MPN | C-USB-PRG |
|---|
