Scorpion 22mm Stick Motor Mount
All of the Scorpion 22mm motors include a cross style back-plate mount, but for some installations, you just need to have a stick mount. The Scorpion Stick Mount is designed to fit the back of the 22mm Scorpion motors and provide a mounting point to a 10mm or 3/8" square motor mount stick.
The Scorpion 22mm Stick Mount is made from strong aluminum alloy and finished in a durable and attractive black Electro-Coat finish. To finish off the look, the Scorpion Logo is laser engraved on the side of the mount to match your Scorpion Motor.
The mount comes packaged with four 3mm machine screws to attach it to the back of your motor. The mount weighs only 3.5 grams by itself, and with the 4 screws, it weighs 4.4 grams. The hole spacing on the back of the mount measures 16mm center to center on the vertical pair of holes, and 19mm center to center on the horizontal pair of holes. With this standard hole spacing, the Scorpion Stick mount will not only fit the Scorpion Motors, it will also fit the GWS 22mm outrunners, the Hacker A20 series outrunners, the Waypoint 22mm outrunners, the AXI 22mm outrunners , the Cobra 22mm outrunners, or any other motor with a 16 or 19mm hole spacing.
|Select Label||Use General Config|