Rebel Series Brushless ESC LED Programmer

PLEASE NOTE:

This LED Programmer works with the BadAss Rebel V1 ESCs only!  It is not compatible with any Rebel or Renegade V2 ESCs.

For those of you that do not mind the tedious and mind-numbing process of performing throttle stick programming, all the programming options and settings are available using that method.  However, we highly recommend purchasing this optional BadAss LED Program Card since you probably have better things to do with your time.

The BadAss Rebel Series ESC’s offer a full set of programming options as shown below.  These are easily set using this optional LED Program card.  For each parameter, the factory default setting is shown in bold text.

1. Brake Type – Off, Soft, Medium or Hard
2. Battery Type – NiXX, LiPo or LiFe
3. Cutoff Voltage Level – 2.8v (50%), 3.0v(60%), 3.2v(65%) or No Cutoff
4. Motor Timing – Auto, 2 Deg., 8 Deg., 15 Deg., 22 Deg. Or 30 Deg.
5. SBEC Voltage Output (When applicable) – 5.0v, 5.5v or 6.0v
6. Governor Mode – Off, 8-Sec. Soft Start, 18-Sec. Soft Start, Gov. Mode 1 and Gov. Mode 2
7. Motor Rotation Direction – Normal or Reverse
8. Motor Start-up Power – 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45% or 50%
9. Low Voltage Cutoff Type – Reduce Power or Motor Shutdown

CLICK HERE to download the Rebel Programmer Manual